Plastic Adapter for Vehicle Rooftop Air Conditioner
Plastic adapter between the outside of the roof and the outdoor AC unit. This adapter fills the gap between the existing 400 x 400 mm opening in the roof (used for the sunroof) and the recommended 356 x 356 mm mounting opening. The package also includes 3 pieces of rubber silent blocks to ensure the horizontal mounting position of the rear part of the outdoor unit.
Carton dimensions: 595 x 580 x 90 mm
| Power Supply | – | 12 V DC from the Mains Power Supply Adapter | – |
| Maximum Input Current | – | 0.5 A at 12 V Supply Voltage | – |
| GSM Bands | – | GSM 900, 1800 MHz | – |
| SIM Card Format | – | Mini-SIM (2FF) | – |
| Max. Relay Contact Load | – | 24 V / 2 A | – |
| USB Port | – | Mini-B | – |
| Package dimension | (w x h x d) | 820 x 80 x 80 | mm |
| Net Weight | – | 4,3 | kg |
| Gross Weight | – | 4,5 | kg |
| Package volume | – | 0,005 | m3 |
| Package dimension | (w x h x d) | 650 x 50 x 450 | mm |
| Net Weight | – | 6,9 | kg |
| Gross Weight | – | 7,5 | kg |
| Package volume | – | 0,014 | m3 |
| Power Supply | – | 230 / 50 ± 10 % | V / Hz |
| Rated Power Input | – | 3 | VA |
| Dimension | (w x h x d) | Standard Module Box for DIN Rail with a Width of 53 mm | mm |
| Package Dimension | (w x h x d) | 120 x 100 x 80 | mm |
| Net Weight | – | 0,14 | kg |
| Gross Weight | – | 0,21 | kg |
| Storage Temperature Range | – | -20 ~ +60 | °C |
| Operating Temperature Range | – | -10 ~ +45 | °C |
Bacnet Gateway
BACNET gateway for SINCLAIR residential air conditioners enables control of the system via BACNET protocol. The gateway can connect up to 255 indoor units. It is compatible with wall mounted units with the possibility of connection SWC-02 wired controller, and with cassette, duct and floor-ceiling units of Multi Variable and UNI SPLIT series.
Bacnet Gateway
BACNET gateway for SINCLAIR residential air conditioners enables control of the system via BACNET protocol. The gateway can connect up to 255 indoor units. It is compatible with wall mounted units with the possibility of connection SWC-02 wired controller, and with cassette, duct and floor-ceiling units of Multi Variable and UNI SPLIT series.
Control Module for Air Conditioners in Server Rooms
SCMI-03S can be used with two air conditioning units placed in the same room. The module is compatible with all split wall mounted units and MULTI VARIABLE series and UNI SPLIT series. It can secure periodic switching between the two units. When there is a lack of capacity the module will turn on second unit. It also reads temperature in a room and provides error signal when limit value is exceeded.
Module is equipped with monochromatic display, 3 output relays, 2 IR transmitters which need to be placed properly in the body of indoor unit and 1 ambient temperature sensor.
Dry Contact Gateway
SDG-01is optional accessory for UNI SPLIT series (ASH-xxBIH, ASC-xxBI, ASD-xxBI, ASF-xxBI). It is a module with external contacts for the safety shutdown of the air conditioning and for monitoring the operation and fault signalization of the air conditioning.
Module allows the unit to be turned on and off, forced shut down and externally switching between cooling and heating modes. Among the output signals you will find information of the unit’s operation, fault condition, mode etc. The module is designed for indoor installation. It is connected directly to the connector on PCB of the indoor unit with the 4-core cable included in the package and its length is 9 m.
Modbus Gateway
- Enables the communication of indoor units of UNI SPLIT series via the Modbus protocol
- Can be used for connection of external control system, which uses Modbus protocol or for connection of central controller SCC-36 or SCC-16 respectively (for each indoor unit you need to order 1 pc of SMG-01)
- Control software is not included, it has to be field supplied
